Hikvision DS-2CD1153G0-I 5 MP Fixed Dome Network Camera. Products. HiLook IP Products Hikvision License Activation. Hikvision App Store. See All . Partners. Download SADP Tool : https://bit.ly/34goKMdStep by Step SOLVE Hikvision OFFLINE Issue : https://bit.ly/3CQQcRbHow To Find Hikvision Device Verification Code #ipcamerareset #hikvisioncamerareset #hikvisionmultiplecamerapasswordresetHow to reset multiple Hikvision ip cameras at a time sending single email to Hikvis This could be either using the reset button or I'd be more likely to use the web browser and fathom out the password. Once complete and after ensuring that the camera channel on the NVR is set to Plug and Play, reconnect it to the NVR and it will re activate. Repeat with the other cameras. Ah-HA! Thanks, Alastair I had neglected to power-down, my previous reset attempt was done while still powered up.(oops!) Unplugged the PoE cable, held down the reset button, plugged the cable back in - [an awkward process with only two hands] and THIS time, it worked, (doh!) and was then able to browser in to default IP of 192.168.1.64 and it immediately asked me to set a strong password. .Camera Activation Password O Reserved Email Shutdown admin IP Address Subnet Mask HIKVISION HIKVISION J IP Address Address 01 v a Therefore if all fails, ensure that your new 4MP camera has a fixed IP 192.168.1.4 (i.e. disable the camera DHCP from the camera menus) and connect it at the NVR PoE switch. If that does not work, also configure manually the third camera port at the NVR with the same settings (IP, gateway, mask, password) as the new 4MP camera. I tried this. azLtd.

hikvision ip camera activation password